Ei Electronics Ei168RC Instruction Manual download pdf (Page 3)

1. Overview

Congratulations on purchasing the single button Alarm Controller for RadioLINK Fire and Carbon

Monoxide (CO) Alarm systems. The Alarm Controller tests and controls Fire, CO and combined (Fire + CO)

RadioLINK Alarm systems.

Alarm Controller functionality

Some older revisions of our RadioLINK modules do not support the Memory ID function. Check the webpage or use the QR code on page 5

for a complete and accurate list of products that support this function.

Memory Identification Identifies the Alarm that has previously been activated

Function Description

Test All the Alarms can be tested from a centralised location

LocateThis will silence all the Alarms in the system except the one sensing Fire or CO

Silence This will silence the source Alarm(s)

Fire Indicator Indicates that a Fire Alarm has been activated

CO IndicatorIndicates that a CO Alarm has been activated

EOL Indicator Indicates that the Alarm Controller battery has reached its end of life (EOL)

Memory Indicates if a Fire or CO Alarm has been previously activated

1 2 3 4 5 6 7 8 ... 23 24

No comments

Ei Electronics Ei168RC Instruction Manual Page 3