Ei Electronics Ei262 Specifications download pdf (Page 35)

Radiolink Base Ei168RC

The Ei262 CO Alarm can be interconnected to any of the RadioLINK Smoke/Heat/Fire Alarms such as

the Ei160 Series mounted on an Ei168RC RadioLINK Base or and Ei405 Smoke Alarm.

Deaf & Hearing Impaired RadioLINK Alarm System Ei170RF:

For use with RadioLINK Smoke/Heat/Fire/CO Alarms. With built-in Strobe and vibration pad.

Alarm System Control Switch Ei1529RC:

(for use with models Ei161RC/164RC/166RC/Ei2110/Ei261ENRC/Ei262 only)

The System Control Switch is recommended for systems with at least one Carbon Monoxide Alarm and

three or more Smoke / Heat / Fire Alarms. It allows the user to perform the following functions from a

remote location:

LOCATE - If alarms sound press Locate to allow source of alarm to be identified (audibly).

HUSH - Press Hush to silence nuisance alarms.

TEST - Operate weekly to Test the alarms.

MAINS CHECK - Test will not work with mains absent.

Relay Module Ei128R:

The Ei128R module has a relay rated at 250V AC / 5 Amps. This is useful for remote signalling and

turning on lights etc. Also available is the Ei128RBU Relay Module which has battery back-up.

B16587-R0-262-UC-ENG 15/4/09 3:38 PM Page 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

No comments

Ei Electronics Ei262 Specifications Page 35