Ei Electronics Ei262 Specifications download pdf (Page 4)

WHAT TO DO WHEN THE CARBON MONOXIDE ALARM IS ACTIVATED:

(1) Open the doors and windows to ventilate the area.

(2) Turn off all fuel appliances where possible. (The alarm can be silenced immediately, with

low levels of CO, by pushing the Test/Hush button).

(3) Evacuate the property leaving the doors and windows open.

(4) Get medical help immediately for anyone suffering the effects of Carbon Monoxide

poisoning (headache, nausea), and advise that Carbon Monoxide poisoning is suspected.

(5) Ring your gas or other fuel supplier on their emergency number. Keep the number in a

prominent place.

(6) Do not re-enter the property until the alarm has stopped. (If the alarm has been silenced

by pressing the Test/Hush button, wait at least 5 minutes. The alarm will then check that the

CO has cleared).

(7) Do not use the fuel appliances again until they have been checked by an expert. In the

case of gas appliances this must be a Registered Gas Installer.

Note: If the Ei262 Carbon Monoxide Alarm is interconnected to Smoke/Heat Alarms, quickly

press the Locate Button (on Remote Switches Ei411H3 or Ei1529) to silence all alarms

except the one sensing danger and/or find the alarm with the red light flashing rapidly. If it

is a carbon monoxide leak follow the above instructions. If it is a fire, evacuate the premises

closing all doors as you go , ring the fire brigade and follow the other smoke/heat alarm

emergency instructions.

B16587-R0-262-UC-ENG 15/4/09 3:38 PM Page 4

1 2 3 4 5 6 7 8 9 ... 39 40

No comments

Ei Electronics Ei262 Specifications Page 4